Panasonic PV-500, User Manual

Page: 409 / 494

407
C
o
nt
rol
w
it
h C
om
m
uni
c
a
tion P
or
t
C
h
ap
te
r 9
INDE
X
Setting Invalid/Valid of Keypad operation
This is a command for prohibiting/permitting keypad operation in RUN MENU.
When keypad operation has been set to "Invalid", the keypad cannot be used. A message "Keypad is invalid" is
shown in the key guide space on the window. Even when setting to "Invalid", key emulate commands can be
received.
Send % B S ? BCC CR ? = 0-1 (0 = Valid. 1 = Invalid)
Receive % B S $ BCC(10) CR
Error (ERROR 1 signal =
ON)
% B S ! Error code (3-digit) BCC CR
Error Code
270 Not available because SETUP MENU is displayed.
271
Other number than 0.1 and 1 is specified.
Reading Keypad Operation Status
Send % B C BCC CR BCC = 24 or **
Receive % B C $ ? BCC CR ? = 0-1 (0 = Valid. 1 = Invalid)
Canceling Inspection/ Processing (Cancel specific
operation)
Cancels the following active operations, and restores into the previous status before the operation.
•
Cancellation of the operation of a serial command which has been received
•
Abort of the status waiting for Individual trigger input
•
Abort of output in the status waiting for result output after an inspection is complete
•
Abort of image saving from Image Memory to a SD memory card
•
Cancellation of template re-registration
Send % C C BCC CR
BCC = 25 or **
Receive % C C $ BCC(01) CR
Layout Switch
Send % I ? ? BCC CR ?? = 00 – 31 (Layout No.)
Receive % I $ BCC(48) CR
Error (ERROR 1 signal = ON)
% I ! Error code (3-digit) BCC CR
Error code
200 Operation is stopped
245
• Although PV500 is operating (RUN), displaying SETUP menu cannot
switch layout.
246
• Other number than 00-31 is specified for layout number.
• No layout has been registered in the specified layout number.