Panasonic PanaVoice Courier, Installation Manual

Page: 55 / 141

PanaVoice Courier Installation Manual 54
EXTERNAL MSG (MESSAGE) NOTIFY
Courier has the ability to call outside of the system to a predefined telephone number
(Pager number included) to notify the mailbox owner that messages have been left in
their mailbox.
From 1 to 4 numbers can be defined in the Notification Number fields for the Courier to
dial. If applicable, you can enter a number in the Beeper Access Code field, and click
the Beeper box, which will instruct the Courier to dial a beeper access code or Personal
Identification Number (PIN), when an answer is detected from a Paging Service.
Some Paging Services allow a message to be recorded after it receives a page. If this is
the case, click the
Voice box, and the Courier will play a prerecorded message (this
message is recorded by the mailbox owner through their telephone, under the Notify
option).
If only one number is defined the Courier will dial that number until a connection is made.
If a successful connection is not made on the first attempt, the Courier will redial that
number after the minutes set in the
Interval field has expired.
When several numbers are defined, the Courier will start with the number in the first field
and switch to the next field after the minutes set in the Interval field has expired.
If the Courier dials all the numbers set in the Notification number fields without a
successful connection, the Courier will start the process over again from the top number.
When the Analyze box is selected, the Courier will attempt to detect an answer by
listening for progress tones provided by the beeper service before sending the Beeper
Access Code and or the Voice message.
If not selected, you must manually adjust the timing by programming the pauses within
the Notification Number. (A comma is equal to a 1-second pause, a semicolon is equal to
3 seconds, and a percentage sign is equal to 5 seconds).
Cascading is accomplished in this section, and the Courier will dial the numbers that
have been defined, in the order that they appear (the top box is first, the bottom is last).
The order can be changed by simply clicking and dragging a box to the desired location.
In order for the Courier to dial a specific number, the Active box must be checked.