Panasonic PanaVoice Courier, Installation Manual

Page: 121 / 141

PanaVoice Courier Installation Manual 120
NETWORKING: NOVELL, NT & 98 SE
Networking the Courier together with other computers allows you to run the User
Interface remotely. Other optional Courier components may also utilize a network
connection. When installing the Courier on a network, care should be given to providing
adequate security to the files on the Courier computer.
Assuming that the networking hardware is in place and functional, the following are the
steps for installing other computers so that they may communicate with the Courier
machine:
♦
From the desktop, Right click on the network neighborhood icon and select
"Properties" from the list.
♦
Confirm that your network card is listed under "The following network components
are installed". If not, you will need to troubleshoot the hardware installation before
continuing.
♦
Confirm that "Client for Microsoft Networks" is listed.
•
If it is, skip to the next step.
•
If not, click "add", highlight "Client" and click "add".
•
Choose "Microsoft" under Manufacturers and "Client for Microsoft Networks"
under Network Clients. Click "OK".
It should now be listed in the installed components’ box.
Confirm that TCP/IP is entered as an available protocol.
To add TCP/IP,
•
Click "add" "protocol" then Microsoft and TCP/IP protocol.
When the protocol is added, the properties will be shown.
•
Click on the IP Address tab.
•
Click on "Specify an IP Address".