Panasonic PanaVoice Courier, Installation Manual

Page: 133 / 141

PanaVoice Courier Installation Manual 132
RHETOREX ACCUCALL PLUS FOR WINDOWS
P
U R P O S E O F
A
C C U C A L L
P
L U S F O R
W
I N D O W S
AccuCall Plus for Windows is a utility program, which analyzes call progress tones in
order to create Tone Definitions that can be used to recognize them.
The ability to recognize a specific tone on the phone line is called Call Progress
Monitoring, or CPM. Rhetorex telephony boards support CPM under the control of a
telephony software application, an ability called Programmable Call Progress Monitoring,
or PCPM.
The Tone Definitions created by AccuCall Plus for Windows are stored in a file called a
PCPM table. Since a telephony application usually needs to distinguish between several
call progress tones, a PCPM table typically holds several Tone Definitions.
In addition to Tone Definitions, every PCPM table also includes Filter Definitions, Filter
Parameters and PCPM Parameters. These settings are used to adjust PCPM
performance.
U
S I N G
A
C C U C A L L
P
L U S F O R
W
I N D O W S
The features of AccuCall Plus for Windows are used to modify the active PCPM table. In
order to use these features, you must first either create a new PCPM table or load an
existing PCPM table using the New and Open commands from the File menu.
The information stored in the PCPM table is presented in three windows: Tones, Filters
and PCPM Parameters. These windows can be arranged and displayed using the
options in the View and Window menus.
The Tones, Filters and PCPM Parameters windows allow you to modify the PCPM table
manually. The Tools menu provides two tools that modify the PCPM table automatically:
Learn New Tone and Test.
When the PCPM table is created and tested, it is saved to a file using the Save or Save
As options from the File menu.
L
E A R N
N
E W
T
O N E
C
O M M A N D
( T
O O L S
M
E N U
)
Use this command to automatically analyze a call progress tone and add it's definition to
the active PCPM table.
Learn New Tone dials the phone number then analyzes the frequencies and cadence of
any call progress tone present on the phone line. Once analysis is complete, Learn New
Tone adds a Tone Definition for the signal to the PCPM table.
Specify a Phone Number and Minimum Cycles in the Learn New Tone dialog box then
press Start to begin call progress analysis. The Learning... dialog box shows the
detected as the tone is analyzed. When the analysis is complete, press Add Tone to add
the Tone Definition to the PCPM table.