Panasonic PanaVoice Courier, Installation Manual

Page: 116 / 141

PanaVoice Courier Installation Manual 115
PBX WIZARD
This feature helps define the parameters for a PBX that has not already been defined in
the PBX Parameters section.
From the Courier OutLook Bar, under the Parameters Tab, click the PBX Wizard icon.
The following menu appears:
Select Apply to apply any item without leaving this screen. Select Cancel to leave this
screen without saving any changes. Select OK to apply all changes and leave this
screen.
NIGHTLY MAINTENANCE ROUTINES
Every day, the Courier must shut down to perform several maintenance routines.
Typically, this process will take approximately five minutes, and the Courier cannot
process incoming calls during this procedure.
You can set the time of day this routine is performed in the Systems Parameters section
under Daily Shutdown Time. It is highly recommended to perform this routine at the
appropriate time of day that no calls are coming in. In default, the time is set at 12:05
am. Normally this time is fine; however, in some cases you may have to select a better
time.
The Courier Engine is actually active during this procedure but because it is so busy
evaluating every file, it cannot be interrupted with incoming call traffic. Once the routine
is complete, it is then ready to answer calls again.