Panasonic LP-RH Series, Setup And Maintenance Manual

Page: 99 / 240

99
No. Name and description
Y16
Y17
Y18
Y19
INTERLOCK 1 MONITOR: Interlock 1 monitoring
INTERLOCK 1 MONITOR COM.: Interlock 1 monitoring common
INTERLOCK 2 MONITOR: Interlock 2 monitoring
INTERLOCK 2 MONITOR COM.: Interlock 2 monitoring common
INTERLOCK 1 MONITOR (Y16 - Y17) monitors the contact status of INTERLOCK 1 (X16 - X17). INTERLOCK
2 MONITOR (Y18 - Y19) monitors the contact status of INTERLOCK 2 (X18 - X19). For details, refer to “4-4-3
Interlock terminal rating and I/O circuit” (P.111).
State of INTERLOCK terminals Operation of INTERLOCK MONITOR terminals
X16 - X17: OPEN Y16 - Y17: CLOSE
X16 - X17: CLOSE (Short-circuited) Y16 - Y17: OPEN
X18 - X19: OPEN Y18 - Y19: CLOSE
X18 - X19: CLOSE (Short-circuited) Y18 - Y19: OPEN
Interlock monitor is switched open and closed with a delay of approx. 50ms with reference to each interlock
input as shown below.
50ms 50ms
INT) - INTERLOCK(-)
(X16 - X17, X18 - X19)
INTERLOCK MONITOR - INTERLOCK MONITOR COM.
(Y16 - Y17, Y18 - Y19)
CLOSE
OPEN
CLOSE
OPEN
Y20 LASER SUPPLY OUT
Output ON during LASER SUPPLY IN (X6) is ON including the preparing time of the laser pumping.
To show the on/off state of the laser supply by using the external warning light or other indicator, connect this
terminal to them.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• Use LASER STANDBY OUT (Y6) for the confirmation of laser pumping completion.
*1 : Set the output time of the one-shot output on the system settings screen of Laser Marker NAVI smart. The setting
range is 2 to 510ms. The initial setting value is 40ms. One-shot output time has a small margin of error for the setting
value.
ME-LPRH-SM-3