Panasonic LP-RH Series, Setup And Maintenance Manual

Page: 160 / 240

160
6-1-7 Code reader (DataMan) setting
If DataMan is used for code checking of image checking after marking, set the following items.
• DataMan IP address and Telnet Port number: Set them according to the network settings.
• Code reading setting: Set the code type, etc. to read the code to be marked by the laser marker.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• For specifications and setting of code reader DataMan, refer to the instruction manual for DataMan.
• Ensure that any code other than the readout target is in the DataMan shooting range. Code reading is not performed
properly.
• If the code type is UPC-E (6-digits UPC code), set DataMan’s “UPC/EAN Properties” as follows:
• Check off “Expanded”
• Check on “Delete Leading Zero”
„
DataMan communication settings specification for connection with laser marker
Item Ethernet communication specifications
Communication protocol TCP/IP
ME-LPRH-SM-3