Panasonic LP-RH Series, Setup And Maintenance Manual

Page: 128 / 240

128
4-6-10 Guide laser radiation input
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON (Close)
OFF (Open)
T3
T2
T1
T4
SHUTTER ENABLE IN (X9)
SHUTTER IN (X8)
SHUTTER CLOSE 1 OUT (Y8)
SHUTTER CLOSE 2 OUT (Y9)
SELECT 0 - 2 IN (No.19-21)
GUIDE IN (No.23)
*1
*2
READY OUT (Y5)
Item Time Remarks
T1 Max. 1 sec. There is a delay time of around 200ms to max. 1 second from turning ON/OFF of
SHUTTER IN (X8) to turning ON/OFF of SHUTTER CLOSE 1 OUT (Y8) and SHUTTER
CLOSE 2 OUT (Y9).
T2 0ms or more Turn on GUIDE IN (No.23) with the shutter closed.
T3 0.5ms or more After a lapse of 0.5ms or more from specifying SELECT 0 IN to SELECT 2 IN, turn on
GUIDE IN.
T4 Max. 60 sec. The guide laser is stopped automatically after passing 1 minute from start-up.
*1 : Select the indication contents of the guide laser with SELECT 0 IN to SELECT 2 IN as follows.
Radiation details SELECT 0 IN (No. 19) SELECT 1 IN (No. 20) SELECT 2 IN (No. 21)
Work distance OFF OFF OFF
Marking image ON OFF OFF
Marking field OFF ON OFF
Masked objects ON ON OFF
*2 : Keep the input state of SELECT 0 IN to SELECT 2 IN (No.19-21) while GUIDE IN (No.23) is turned ON.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• To use a guide laser in remote mode while any of the INTERLOCK inputs (REMOTE INTERLOCK IN, INTERLOCK
1, INTERLOCK 2) is open, set “Deactivate while shutter closed” in “System settings” > “Operation/information” >
“INTERLOCK alarm detection”.
• If you have configured the guide laser control method of external control to communication commands by the system
settings of Laser Marker NAVI smart, the guide laser radiation by I/O is not possible.
• Do not execute any other operation while the guide laser is emitted.
ME-LPRH-SM-3