Panasonic LP-RH Series, Setup And Maintenance Manual

Page: 28 / 240

28
Item
Model
LP-RH300S
LP-RH300T
LP-RH200S
LP-RH200T
LP-RH100S
LP-RH100T
LP-RH301S
LP-RH301T
LP-RH101S
LP-RH101T
LP-RH305S
LP-RH305T
Pollution degree 2
Use location Indoor; at an altitude of 1000 m or below
Installation
direction
Head In all directions
Controller Vertically or horizontally
Weight
Head Approx. 19kg
Approx.
17kg
Approx.
19kg
Approx.
17kg
Approx.
19kg
Controller Approx. 12kg
Battery
(mounted in
product)
Type Manganese dioxide lithium primary battery
Model AFP8801 (BR-2/3A)
Quantity 1
Weight Approx. 14g
*1: There is approx. +/-2mm deviation per product.
*2: The value shown here is the configuration range that can be input. The setting values that can keep the quality of
marking or processing vary depending on the setting details and the target materials.
*3: Depending on the setting data, the actual movement may not be able to keep up with the scan speed and an error may
occur. In that case, decrease the scan speed setting.
Example: Applications that repeat marking or processing of short lines at high speed, etc.
*4: Average output power from the laser marker at delivery time with the maximum laser power setting.
*5: Some of the languages or character types are not supported by this laser marker. Characters written from right to left
such as Arabic or Hebrew, characters based on ligature such as Indian languages cannot be input.
*6: VEC is a graphic file format dedicated for the laser marker. To use AI or EPS files, convert them to VEC format with the
dedicated software “ExportVEC”.
*7: Available when the optional network unit is installed to the controller.
*8: The software is available from our Internet website. For details, refer to “1-2-4 Download software and manual” (P.25).
*9: OS versions of which Microsoft has ended support are excluded.
*10: The frequency switches automatically.
*11: The typical value of the inrush current at startup is as follows: (Duration time is 10ms or less.)
At 100V AC: 90A
At 200V AC: 180A
*12: Common to the controller and head. No condensation or freezing shall be allowed. If there is a gap between the stored
temperature and operating temperature, make sure to have the product get used to the operating ambient temperature
gradually prior to use to prevent the dew condensation.
*13: The laser output, etc. may vary depending on the fluctuation of the operating ambient temperature.
ME-LPRH-SM-3