Panasonic LP-RH Series, Setup And Maintenance Manual

Page: 54 / 240

54
2-4 Controller Installation
WARNING
• Make sure that the power is turned OFF at installing. Failure to do so may
cause electrical shock.
• To carry this product, wear the non-slip gloves.
• In case it falls down, it may cause injury.
2-4-1 Installation method
„
Carrying the controller
To carry the controller, hold the bottom of the unit with both hands.
Do not hold the cables or connectors at carrying this product.
„
Installation method
• The controller can be installed vertically or horizontally.
• When installing horizontally, install it with the key switch side of the controller down as shown in the figure below.
• For details of installation, refer to “1-4-2 Controller” (P.31).
• Fix the controller in the following conditions.
Fixing surface Fixing screw Screw insert length Tightening torque
Bottom M5 screws at 4 positions 4 mm to 6 mm 2.0 N·m
Left side (facing the front)
M5 screw
M5 screw
ワㄐㄕㄊ㄄ㄆ
• Do not insert any screw of length exceeding the specification. Otherwise, the failure of the product may be caused.
• Do not install the laser marker at a place where vibrations and shocks can be directly transmitted to it. In any
environment where effects of vibration are concerned, take measures against vibration on the product.
• Do not install in any direction other than the above.
ME-LPRH-SM-3