Panasonic LP-RH Series, Setup And Maintenance Manual

Page: 46 / 240

46
„
Tower head model
When the mounting surface of the tower head is rear side, it can be mounted in the left, right, top and bottom direction.
When the lens side is mounting surface, install the tower head always with the lens side down.
ワㄐㄕㄊ㄄ㄆ
• Do not move the head unit during the operation.
• When the product is installed with the laser emission port facing upward, dust generated during marking may attach to
the laser emission port, impairing marking quality and damage the product. Clean the laser emission port periodically
according to the head installation conditions and environment.
• When fixing the bottom (lens side) of the tower head model, install the model so that the bottom (lens side) faces
downward. The model cannot be mounted in any direction other than those shown above. When installing the tower
head model sideways or when installing it with the lens side facing upward, be sure to fix it on the rear side.
• Warp may occur in the bottom surface of the standard head model or in the rear surface of the tower head model, but it
gives no problem in using the product.
ME-LPRH-SM-3