Panasonic LP-RH Series, Setup And Maintenance Manual

Page: 178 / 240

178
„
Steps for replacement of air filter (head)
Replace air filter regularly according to the usage environment.
1.
Turn OFF the key switch of the controller, and disconnect the AC power cable.
2.
Loosen the screws (two M3 screws on each panel) on the
side panels and remove the panels (two panels).
3.
Bend and slide the filter to remove it from the panel.
4.
If the panel or intake vent is contaminated, remove the dust with a vacuum cleaner or a dried cloth.
ワㄐㄕㄊ㄄ㄆ
• Do not blow air to the intake/exhaust vent. If the dust penetrates in the laser marker, it may result in failure.
5.
Mount a new filter on the panel.
Set the filter side with the convex shape along the screw hole
side of the panel.
ワㄐㄕㄊ㄄ㄆ
• The air filter of this product is not washable. If it is contaminated,
replace it by new one.
• Make sure the filter is clean and free of tears before use. Also,
make sure that the tabs on the filter frame are not broken.
• Do not operate the laser marker without the filters. It may cause a
product failure.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• There is no front and back in the filter.
ヱヰヸユ
ン
ON
OFF
Screw
Side panel
Convex shape
Screw
ME-LPRH-SM-3