Panasonic LP-RH Series, Setup And Maintenance Manual

Page: 137 / 240

137
4-6-20 MAINTENANCE OUT
T2
T2 T1
SYSTEM STANDBY OUT (Y7)
WARNING OUT (Y14)
MAINTENANCE OUT (Y13)
ALARM OUT (Y15)
*1
*２
ON
ON
OFF
ON (Normal)
OFF (Error)
ON
OFF
ON (Normal)
OFF (Error)
OFF
Maintenance criterion
Operating time
or
Number of operations
*1 : When the maintenance criterion operating time or number of operations is reached, MAINTENACE OUT turns ON.
*2 : Entering the maintenance complete on the maintenance screen in Laser Marker NAVI smart, resets the operating time
or number of operations.
Item Time Remarks
T1 Max. 1 sec. It takes max. 1 sec. from the instant when the operating time or the number of operations
of a part subject to maintenance reaches the maintenance criterion to the instant when
MAINTENACE OUT (Y13) turns ON.
T2 Max. 10 sec. Time for system startup. If there is any part whose operating time or number of
operations has reached the maintenance criterion at the time of startup of the laser
marker, MAINTENACE OUT (Y13) turns ON simultaneously with turning ON of
SYSTEMSTANDBY OUT (Y7).
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• The ON/OFF status of MAINTENANCE OUT (Y13) does not affect READY OUT (Y5).
• When “Laser pumping time [h]” and “Number of shutter open/close operations” reach the maintenance time, our service
staff will handle maintenance and replacement. Contact our sales agency.
ME-LPRH-SM-3