Panasonic FP0 Series, User Manual, Page: 304 / 382

14-62
14.3 Table of High-level Instructions
The high-level instructions are expressed by the prefixes “F” or “P” with numbers. For most of the high-
level instructions, “F” and “P” types are available. The differences between the two types are explained
as follows:
•
Instructions with the prefix “F” are executed in every scan while its trigger is in the on.
•
Instructions with the prefix “P” are executed only when the leading edge of its trigger is detected.
Num-
ber
Name Boolean Operand Description Steps
Data transfer instructions
F0
P0 16-bit data
move MV
PMV S, D (S)
→
(D) 5
F1
P1 32-bit data
move DMV
PDMV S, D (S+1, S)
→
(D+1, D) 7
F2
P2
16-bit data
invert and
move MV
PMV/ S, D (S)
→
(D) 5
F3
P3
32-bit data
invert and
move DMV/
PDMV/ S, D (S+1, S)
→
(D+1, D) 7
F4
P4
Reading of
head word
No. of the
specified
slot GETS
PGETS S, D The head word No. of the specified slot is read. 5
F5
P5 Bit data
move BTM
PBTM S, n, D The specified one bit in “S” is transferred to the
specified one bit in “D”. The bit is specified by “n”. 7
F6
P6
Hexadecimal
digit (4-bit)
data move DGT
PDGT S, n, d The specified one digit in “S” is transferred to the
specified one digit in “D”. The digit is specified by
“n”. 7
F7
P7 Two 16-bit
data move MV2
PMV2 S1, S2, D (S1)
→
(D),
(S2)
→
(D+1)
7
F8
P8 Two 32-bit
data move DMV2
PDMV2 S1, S2, D (S1+1, S1)
→
(D+1, D),
(S2+1, S2)
→
(D+3, D+2)
11
F10
P10 Block move BKMV
PBKMV S1, S2, D The data between “S1” and “S2” is transferred to
the area starting at “D”. 7