Setting Sensing
236
ZW-8000/7000/5000
User's Manual
8
Set "200".
The current setting value is displayed on the sub-display.
The sub-display blinks and the system enters editing mode.
To edit numerical values, use the
/
/
/
keys.
Input "200", then press the
key.
9
Set the edge 3 track width.
Press the
/
keys to select "TR.WID3" and press the
key.
10
Set "300".
The current setting value is displayed on the sub-display.
The sub-display blinks and the system enters editing mode.
To edit numerical values, use the
/
/
/
keys.
Input "300", then press the
key.
11
Set the edge 4 track width.
Press the
/
keys to select "TR.WID4" and press the
key.
12
Set "400".
The current setting value is displayed on the sub-display.
The sub-display blinks and the system enters editing mode.
To edit numerical values, use the
/
/
/
keys.
Input "400", then press the
key.
13
Execute TEACH.
Press the
key.
14
"OK/CAN" is displayed on the sub-display.
Press the
key to execute teaching or
key to cancel.
When teach is successful, "LCK.OK*" is displayed.
When teach fails, "LCK.ERR" is displayed.
Make sure the measurement surface is present and execute teach
again.
When the measurement surface is present, the STABILITY indicator
is lit during RUN mode. ?
* The successful edge count is displayed. If edges 1 through 3 are
successful, "LCK.3OK" is displayed.
15
Press and hold the
key for two seconds or more to enter the
RUN mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
Steps
Key operation
Display
Description
Summary of Contents for ZW-7000 Series
