manualshive.com logo in svg

Omron ZW-7000 Series, User Manual

Share
Download
Omron ZW-7000 Series User Manual Download Page 95

 2

In

sta
llatio

n

 a

nd 

Con

nection

s

Saving a project

ZW-8000/7000/5000 
User's Manual

93

2-8 Saving a project

Saving a project

Save the project being edited with the PC tool.

The project to be saved has the following information.

• Save a project data when the setting of the Sensor Controller is changed. If the power is turned off without saving, 

the changed setting is cleared. 

 Saving the Bank/System Settings p.185

1

Menu bar: Click [File] - [Save] to select.

Exporting a project

A project data (.smc) can be exported.

The exported data can be used by importing with the other personal computer's PC tool.

Importing a project

The exported data from other personal computers can be imported as project data.

Configuration data

Description

Project information

Information on the sensor registered in this project.

Entire sensor information

Entire sensor information.

Tool setting information

Information on tool setting parameters for each sensor registered in this project.

 3-2 Switching operation modes p.98

1

Menu bar: Click [File

] - [

Export

] 

to select.

1

Menu bar: Click [File

] - [

Import

] 

to select.

Note

Important

Summary of Contents for ZW-7000 Series

















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands