manualshive.com logo in svg

Omron ZW-7000 Series, User Manual

Share
Download
Omron ZW-7000 Series User Manual Download Page 177

Setting Threshold Value

ZW-8000/7000/5000 
User's Manual

175

 4 

Settin

gs for Function

 Multi View Explore

: [Bank Group] | [(Bank Data Name)] (double click)

 

→

 Edit pane

: [Task Settings] icon (

)

 

→

 Task settings window : [Judgment]

• Hysteresis (hysteresis width) can also be set to threshold values. Set hysteresis when measured values are 

dispersed around a threshold value, and judgments are unstable, to prevent chattering.

 “2-1 Parallel I/O connection” described in Displacement Sensor ZW-8000/7000/5000 series Confocal 

Fiber Type Displacement Sensor User’s Manual for Communications Settings (Z363)

• Threshold values can also be adjusted by directly entering values in the RUN mode.

 

This helps you to make fine adjustments without shutting down the system.

 Changing Threshold Values p.228

Item

Setting item

Setting value

Description

Judgment 

LOW threshold

- 999.999999 to 999.999999 [mm]
Factory default differs depending on the con-
nected Sensor Head.

Set the lower limit (LOW) threshold value.

HIGH threshold

- 999.999999 to 999.999999 [mm]

Set the upper limit (HIGH) threshold value.

1

Enter the [LOW threshold] and [HIGH thresh-

old].

Threshold Value Settings can also be set by the operating keys on the Sensor Controller.

 

7-10 Setting Threshold Value p.265

Important

Note

Summary of Contents for ZW-7000 Series

















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands