Omron ZW-7000 Series, User Manual

Page: 233 / 336

Setting Sensing ZW-8000/7000/5000
User's Manual
231
7
Senso
r con
trol
ler
ope
ra
ti
ons
Setting Start Direction of Count Measurement Surfaces
Setting Start Direction of Count Measurement Surfaces p.128
As an example, here is an explanation of the procedure for setting start direction of count measurement surface
to “NEAR”.
Operating procedure
Steps Key operation Display Description
1 Press and hold the key for two seconds or more to enter the
FUNC mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
2 Press the / keys to select “SENS” and press the
key.
3 Press the / keys to select “SUR.DUR” and press the
key.
4 Select the material.
NEAR: NEAR direction
FAR: FAR direction
The current setting value is displayed on the sub-display.
Press / key to enter editing mode and the sub-display blinks.
In this example, select “NEAR” and press the key.
5 Press and hold the key for two seconds or more to enter the
RUN mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).