Omron ZW-7000 Series, User Manual

Page: 164 / 336

Setting the Output Conditions
162
ZW-8000/7000/5000
User's Manual
Hold clearing conditions
Held values can be cleared by the following operation.
• When FUNC (adjustment) mode/RUN (operation) mode is switched
• When hold RESET is entered (32-pole extension connector, key)
• Hold RESET command is entered.
(Example) Peak
(Example) Auto Peak
If an abnormal measured value is obtained, the hold value is cleared. To not clear the hold value even if an abnormal
measured value is obtained, set “KEEP” as the non-measurement setting.
“2-1 Parallel I/O connection” described in Displacement Sensor ZW-8000/7000/5000 series Confocal
Fiber Type Displacement Sensor User’s Manual for Communications Settings (Z363)
When the hold v a l u e i s re s et,
the cl a mp level i s o u tp u t u ntil
the next hold v a l u e i s a pplied.
The mode i s s witched b etween
the FUNC mode a nd RUN mode
FUNC mode
RUN mode
Sa mpling
Sa mpling
Hold v a l u e
Me asu rement
v a l u e
Cl a mp level
When RE S ET i s exec u ted
( 3 2-pole exten s ion connector/key inp u t/comm a nd).
The mode i s s witched b etween
the FUNC mode a nd RUN mode
FUNC mode
RUN mode
Hold v a l u e
Me asu rement
v a l u e
Cl a mp level
When RE S ET i s exec u ted
( 3 2-pole exten s ion connector/key inp u t/comm a nd).
Important