![background image](http://html1.mh-extra.com/html/omron/sysmac-c500-nc222-e/sysmac-c500-nc222-e_operation-manual_742438038.webp)
27
SECTION 3
Data Configuration
Before executing positioning actions, you must enter the necessary data into the EEPROM of the Position Control Unit.
The C500-NC222-E Position Control Unit has a large data capacity. The EEPROM can store data for 300 positioning
actions, 100 speeds, 19 parameters, 10 dwell times, and 10 acceleration and deceleration times per axis. You can set data
most conveniently with the Teaching Box, but it is also possible to send data from the PC to the Position Control Unit.
Data is automatically transferred from EEPROM to RAM when the Position Control Unit is powered up. The commands
transferred from the DM area of the PC (see
Section 6 Commands
for details) contain settings which access this data.
3-1
Overview
28
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-2
Data Allocations
29
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-3
Setting Parameters
30
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-4
Setting Positioning Actions
42
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-5
Setting Dwell Times
48
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-6
Setting Acceleration and Deceleration Times
48
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-7
Setting Speeds
49
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-8
Initial Data
50
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .