50
3-8
Initial Data
The following tables list the default data loaded originally in the EEPROM at
the factory. The operation of each of these is described in
Section 3 Data
Configuration
. This data will be automatically loaded to RAM whenever pow-
er is turned on. The contents of EEPROM can be changed with the Write EE-
PROM (STORE) command.
X-Axis Positioning Actions
Attributes
Dwell time = 500 ms
Absolute, terminating,
acceleration time = 200 ms
deceleration time = 200 ms
Dwell time = 0 ms
Incremental, continuous,
acceleration time = 100 ms
deceleration time = 100 ms
Dwell time = 500 ms
Absolute, continuous,
acceleration time = 100 ms
deceleration time = 300 ms
Dwell time = 0 ms
Absolute, terminating,
acceleration time = 100 ms
deceleration time = 200 ms
Dwell time = 100 ms
Absolute, interpolating end,
acceleration time = 100 ms
deceleration time = 200ms
Address
100
101
102
103
104
Description
X-axis test data (1)
X-axis test data (2)
X-axis test data (2)
X-axis test data (2)
X- and Y-axes test data (1)
Setting
Position = 500 pulses, speed
= 1 kpps, M code = 01
Position = –500 pulse, speed
= 3kpps, M code = 02
Position = –500 pulses,
speed = 2 kpps, M code = 03
Position = –500 pulses,
speed = 1 kpps, M code = 04
Position = 0 pulse, speed = 1
kpps, M code = 05
Initial Data
Section 3-8