![background image](http://html1.mh-extra.com/html/omron/sysmac-c500-nc222-e/sysmac-c500-nc222-e_operation-manual_742438082.webp)
72
5-3-3 Error Op Codes
Word D + 2
Bit
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Content
Displays number of oper-
ands in BCD of preced-
ing Op code.
Displays error-causing
Op code rightmost digit
in BCD.
Displays error-causing
Op code middle digit in
BCD.
Displays error-causing
Op code leftmost digit in
BCD.
Function
Error Op
Codes
ON
When a
command
error has
occurred.
OFF
When a proper
command has
been received.
Initially
0
On error
0
5-3-4 Status Flags (1)
Command abbreviations are listed below the table (also see the beginning of
Section 7 Commands). “X,” “Y,” and “I” indicate the X axis, Y axis, and inter-
polation and precede some commands. These prefixes are mostly dropped
in the table because the flags are the same for the three different servo con-
trol modes.
X-Axis: Word D + 3
Y-Axis: Word D + 10
Bit
Function
Content
ON
OFF
Initially
On
system
error
0
Current
Position
Sign
Indicates current
position as positive
or negative.
When current position
is negative (–).
When current position is zero
(0) or positive (+), or when
origin is not defined.
0
0
1
Emergency
Stop
Indicates an
emergency stop.
When EMG or external
interrupt is received.
When ERST (error reset) is
received.
0 or 1
1 or no
change
2
Pause
Indicates pause.
When HLD is received.
When REL, STP, or EMG is
received, when external
interrupt is received, or when
system error occurs.
0
0
3
Stop
Indicates positioning
has stopped.
When there is no
movement.
When SRT, JOG, ORG, or
PLS is received.
1
1
4
Positioning
Indicates positioning.
When SRT is received.
When a terminating
completion code is executed
and positioning is completed,
when a system error occurs,
or when STP or external
interrupt is completed.
0
0
5
Jogging
Indicates jogging.
When JOG is received.
When STP or external
interrupt completed or
system error occurs.
0
0
Status Word Details
Section 5-3