Omron NJ101-10 Series, User Manual

Page: 95 / 280

Cables and Connectors

Size and Conductor Pairs: AWG 24 × 4 Pairs
Part name Manufacturer Model Contact information
Cables Hitachi Metals, Ltd. NETSTAR-C5E SAB 0.5
× 4P* Planning Department,
Kanetsu Co., Ltd.
Kuramo Electric Co., Ltd. KETH-SB* Kuramo Electric Co., Ltd.
SWCC Showa Cable
Systems Co., Ltd. FAE-5004* SWCC Showa Cable
Systems Co., Ltd.
RJ45 Connectors Panduit Corporation MPS588* Panduit Corporation US
Headquarters
* We recommend that you use combinations of the above Cables and Connectors.

Size and Conductor Pairs: AWG 22 × 2 Pairs
Part name Manufacturer Model Contact information
Cables Kuramo Electric Co., Ltd. KETH-PSB-OMR* Kuramo Electric Co., Ltd.
JMACS Japan Co., Ltd. PNET/B* JMACS Japan Co., Ltd.
RJ45 Assembly Con-
nectors OMRON Corporation XS6G-T421-1* OMRON Customer Serv-
ice Center
* We recommend that you use combinations of the above Cables and Connectors.
Part name Manufacturer Model Contact information
Cables 3M Japan Limited 79100-IE4P-F1-YE* 3M Japan Limited
RJ45 Assembly Con-
nectors 3R104-1110-000AM*
* We recommend that you use combinations of the above Cables and Connectors.
Precautions for Correct Use
• The maximum length between nodes is 100 m. However, some cables are specified for less
than 100 m. Generally speaking, if the conductors are twisted wire rather than solid wire,
transmission performance will be lower, and reliable communications may not be possible at
100 m. Confirm details with the cable manufacturer.
• When selecting a connector, confirm that it is applicable to the cable that will be used. Con-
firm the following items: Conductor size, conductor type (solid wire or twisted wire), number of
twisted pairs (2 or 4), outer diameter, etc.
Additional Information
If an Ethernet cable of category 5 or higher is used, communications will be possible even if the
cable is not shielded. However, we recommend a cable with double, aluminum tape and braid-
ed shielding to ensure sufficient noise immunity.
4 EtherCAT Network Wiring
4-15
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)
4-2 Laying the EtherCA
T Network
4
4-2-2
Installing EtherCA
T Communications Cables