Omron NJ101-10 Series, User Manual

Page: 264 / 280

Setting Parameters
• The set values of the Setting Parameters are displayed.
• The Setting Parameters are assigned for each module in default by the Sysmac Studio. To
edit the setting parameters, click the Edit Setting Parameters Button.
Backup Parameter Settings
• The set values of Backup Parameter Settings are displayed.
• The Backup Parameter Settings are assigned for each module in default by the Sysmac Stu-
dio. To edit the backup parameters, click the Edit Backup Parameter Settings Button.
Version Information
Sysmac Studio version 1.29 or higher is required to use the Setting Parameters and Backup
Parameter Settings.

Module Setting Items
Some items in the module settings only display the current setting. The other items in the module
settings are changeable.
a. Items for which the current setting is displayed only.
The names of items and their settings are as follows:
Name Meaning of setting
Model The model name of the device
Product name The product name of the device
Connected position The connected position of the device
b. Items for which the current setting is changeable.
The items that you can edit are the Device name , PDO Map Settings , Setting Parameters ,
and Backup Parameter Settings . The meanings of these settings are given below.
Device name
• The name of the module is displayed.
• The default is M#. "#" is a serial number that starts from 1.
PDO Map Settings
• The PDO Map Settings displays the settings for the process data assigned for the module.
• When valid PDOs are present, a list of them is displayed.
• When valid PDOs are not present, "---" is displayed.
• Process data is assigned for each module in default by the Sysmac Studio. To change the
process data assignments, click the Edit PDO Map Settings Button. Refer to A-3-4 Editing
PDO Entry Tables on page A-21 for details.
Setting Parameters
• The set values of the Setting Parameters are displayed.
• The Setting Parameters are assigned for each module in default by the Sysmac Studio. To
edit the setting parameters, click the Edit Setting Parameters Button.
Backup Parameter Settings
• The set values of Backup Parameter Settings are displayed.
Appendices
A-28
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)