Omron NJ101-10 Series, User Manual

Page: 265 / 280

• The Backup Parameter Settings are assigned for each module in default by the Sysmac Stu-
dio. To edit the backup parameters, click the Edit Backup Parameter Settings Button.
Version Information
Sysmac Studio version 1.29 or higher is required to use the Setting Parameters and Backup
Parameter Settings.
Setting Procedure
1
Right-click the slave in the EtherCAT Tab Page and select Edit Module Configuration .
An edit pane for the module configuration is displayed.
2
Select a slave on the edit pane for the module configuration.
A list of the slave settings is displayed.
3
Select the location at which to register a module and double-click the module to register in the
Toolbox . Or, drag the module from the Toolbox to the location to register it on the edit pane
for the module configuration.
Appendices
A-29
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)
A-3 Multi-vendor Environments
A
A-3-5 Settings for MDP-compatible Slaves from Other Manufacturers