Omron NJ101-10 Series, User Manual

Page: 43 / 280

*2. Connection is possible only in full duplex mode. Half-duplex connections will result in link OFF status.
*3. A ring topology can be used for project unit version 1.40 or later.
*4. The maximum number of slaves in 8 for an NX1P2-9B
£££££
CPU Unit.
*5. However, the data must be within eight frames.
*6. However, for project unit version earlier than 1.40, the data must be within four frames.
*7. However, for project unit version earlier than 1.40, the data must be within one frame.
*8. Setting is available only for integer multiples of the task period of the primary periodic task.
*9. The communications cycle is 4,000 μs to 8,000 μs (in 250-μs increments) for an NX1P2-9B
£££££
CPU Unit.
*10. Unit version 1.03 or later of the CPU Unit is required to use this setting on the NJ301-
££££
.
1 Introduction
1-11
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)
1-3 Specifications of Built-in
EtherCA
T Port
1