Omron NJ101-10 Series, User Manual

Page: 57 / 280

• Parameter Setting for the EtherCAT Slaves
Refer to Section 5 Setting Up EtherCAT Communications with the Sysmac Studio on page
5-1 for the Sysmac Studio procedures.
2-1-3
Connecting the Sysmac Studio
You can connect the Sysmac Studio to the NJ/NX-series CPU Unit through the USB or EtherNet/IP
port. You must set the connection method, IP address to connect to, and other parameters for commu-
nications between the computer and Controller.
Precautions for Correct Use
You cannot connect a computer and an NX102 or an NX1P2 CPU Unit because it does not pro-
vide a peripheral USB port.
1
Select Communications Setup from the Controller Menu .
The Communications Setup Dialog Box is displayed.
2 Part Names and Slave Settings
2-7
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)
2-1 Part Names and Functions
2
2-1-3
Connecting the Sysmac Studio