Omron NJ101-10 Series, User Manual

Page: 105 / 280

Connect the slave to the start port of the ring.
Start port of the ring.
Precautions for Correct Use
Do not connect the slave to the end port of the ring X3 that becomes the end point of the ring
topology. You cannot enable the cable redundancy function.
3
In the EtherCAT Tab Page, right-click the originating slave of the ring and select Cable
Redundancy to Enable .
Originating slave of the ring
5 Setting Up EtherCAT Communications with the Sysmac Studio
5-7
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)
5-2
Creating the EtherCA
T Network Configuration
5
5-2-2
Cable Redundancy Setting