Omron NJ101-10 Series, User Manual

Page: 143 / 280

5-9 Downloading the Network Configura-
tion Information from the Sysmac
Studio
You must download the network configuration information in the project from the Sysmac Studio to the
NJ/NX-series CPU Unit.
Use the synchronize operation to download the network configuration information.
Refer to the
Sysmac Studio Version 1 Operation Manual (Cat. No. W504) for information on synchroni-
zation.
Precautions for Safe Use
After you transfer the user program, the CPU Unit is restarted and communications with the
EtherCAT slaves are cut off. During that period, the slave outputs behave according to the slave
specifications. The time that communications are cut off depends on the EtherCAT network con-
figuration.
Before you transfer the user program, confirm that the system will not be adversely affected.
Precautions for Correct Use
If a Link OFF Error (84200000 hex) event occurs, remove the cause of the error and retry
downloading the network configuration information after the error is reset.
1
Go online and select Synchronization from the Controller Menu.
The Synchronization Window is displayed.
2
Click the Transfer to Controller Button.
5 Setting Up EtherCAT Communications with the Sysmac Studio
5-45
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)
5-9
Downloading the Network Configuration Information from the Sysmac Stu-
dio
5