Omron NJ101-10 Series, User Manual

Page: 93 / 280

4-2-2
Installing EtherCAT Communications Cables
Ethernet communications cables and connectors are used to connect the built-in EtherCAT port with
EtherCAT slaves.
Use a straight, shielded twisted-pair cable (double shielding with aluminum tape and braiding) of
Ethernet category 5 (100BASE-TX) or higher.
Cable with Connectors

Size and Conductor Pairs: AWG27 × 4 Pairs
Product name
Manufac-
turer
Cable
length [m]
Model
Contact infor-
mation
Cable with Connectors on
Both Ends
(RJ45/RJ45)
Standard RJ45 plugs
*1
Cable Sheath material:
LSZH
*2
Cable color: Yellow
*3
OMRON
Corpora-
tion 0.3 XS6W-6LSZH8SS30CM-Y OMRON Cus-
tomer Service
Center
0.5 XS6W-6LSZH8SS50CM-Y
1 XS6W-6LSZH8SS100CM-Y
2 XS6W-6LSZH8SS200CM-Y
3 XS6W-6LSZH8SS300CM-Y
5 XS6W-6LSZH8SS500CM-Y
*1. Cables are available in the following lengths: 0.2, 0.3, 0.5, 1, 1.5, 2, 3, 5, 7.5, 10, 15, and 20 m. Refer to
the
Industrial Ethernet Connectors Catalog (Cat. No. G019) for details.
*2. This is the Low Smoke Zero Halogen cable for in-cabinet use. Although the LSZH cable is single shield-
ed, its communications and noise characteristics meet the standards. PUR cables for out-of-cabinet use
are also available.
*3. Cables colors are available in blue, yellow, or green.
4 EtherCAT Network Wiring
4-13
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)
4-2 Laying the EtherCA
T Network
4
4-2-2
Installing EtherCA
T Communications Cables