![background image](http://html1.mh-extra.com/html/omron/ej1-ethercat/ej1-ethercat_user-manual_742375073.webp)
48
Controlling G3ZA Controllers Connected to Output Devices
Section 3-4
3-4-3
Setup
The settings are made through communications. The CX-Thermo Support
Software can be connected using an E58-CIFQ1 Connecting Cable to set the
parameters from a personal computer.
The following table shows the parameters related to the G3ZA that can be set
from the Temperature Controller, as well as example settings.
Note
• The Programmable Terminal and E58-CIFQ1 Connecting Cable cannot
be connected at the same time.
• When connecting the cable for the Support Software to an EJ1C-EDU
End Unit, either turn OFF the Programmable Terminal's power supply or
switch the Programmable Terminal's screen to the system menu.
3-4-4
Adjustment
Execute autotuning (AT) to make the PID adjustments.
If ST is activated, the PID will be automatically calculated when using stan-
dard control.
Refer to
4-3-8 Tuning
for details.
Set the slope and offset values independently to match the system. (The
default value for the slope is 100.0% and the default value for the offset is
0.0%.)
Variable type Address
Parameter name
Set value
DA
0100
G3ZA
Unit number 01
CH1 Slope
028A: 65.0%
0101
CH2 Slope
0288: 64.8%
0102
CH3 Slope
028F: 65.5%
0103
CH4 Slope
0280: 64.0%
0108
CH1 Offset
0032: 5.0%
0109
CH2 Offset
0032: 5.0%
010A
CH3 Offset
0032: 5.0%
010B
CH4 Offset
0032: 5.0%
0110
CH1 Source Channel
0001: Channel 1
0111
CH2 Source Channel
0001: Channel 1
0112
CH3 Source Channel
0001: Channel 1
0113
CH4 Source Channel
0001: Channel 1
0124
Offset control
0001: Enabled
0200
G3ZA Unit number 02 Same as G3ZA Unit number 01
0300
G3ZA Unit number 03
0400
G3ZA Unit number 04
V1.2
Summary of Contents for EJ1 EtherCAT
