![background image](http://html1.mh-extra.com/html/omron/ej1-ethercat/ej1-ethercat_user-manual_742375249.webp)
224
Determining the Error from the Current Situation for Output Errors
Section 8-7
8-7
Determining the Error from the Current Situation for
Output Errors
No Control Outputs. No Alarm Outputs.
Possible cause
Countermeasure
Connection Measured temperature is wrong.
• Perform the action outlined in 7.5.
The load polarity or connected terminals are wrong.
• Rewire correctly.
A load exceeding the output rating is connected.
• Reduce the load to within the rating.
• Get the Unit repaired if it is malfunctioning.
No power supply for the load is connected to the transistor
outputs.
• Use a power supply suitable for the output rating and load.
The polarity of the load power supply for transistor outputs is
incorrect.
• Rewire correctly.
Setting
Set the Operation After Power ON parameter to
Stop
.
• Execute a RUN (start operation) operation command after
the power is turned ON.
• Set the Operation After Power ON parameter to
Continue
.
Control does not start.
• Execute a RUN (start operation) operation command.
The specified channel is incorrect.
• Set the correct channel number.
The control output assignments are incorrect.
• Set the correct control output assignments.
The set point is incorrect.
• Set the correct set point.
The specified bank is incorrect.
• Set the correct bank.
A bank specification for all channels has been assigned to
an event input, and an unintended bank has been selected.
• Assign the bank of the channel for which the bank is to be
changed to an event input.
Alarm mode is set to 0 (no alarm).
• Set the correct alarm mode.
Alarm mode is set to an alarm with a standby sequence.
• Set to an alarm without a standby sequence.
The deviation alarm and absolute-value alarm settings for
alarm mode are incorrect.
• Set the correct alarm mode.
Summary of Contents for EJ1 EtherCAT
