152
Programless Communications
Section 5-1
5-1-6
Bit-specified operation commands
RUN/STOP, AT Execute/Cancel, Auto/Manual, and other operation commands
can be executed by turning bits ON or OFF. Settings for the parameters for
these operation commands can be made only using programless download
settings.
!
Caution
• The following parameters operate by setting the Operation Command
Request Bit to 0003: Single (bit specification), or to 0004: Multi (bit speci-
fication). Refer to
5-1-4 Description of Operation
for details.
• Do not execute operation commands on communication unit numbers that
do not exist.
• When using parameters for both the TC4 and TC2, with duplicate commu-
nications unit numbers, only the data that corresponds to an existing TC2/
TC4 communications unit number will be reflected.
Example: When TC2 (No. 0) and TC4 (No. 1) are connected to the HFU, the
data indicated in gray shading in the following table will be reflected.
For TC2
RUN/STOP, AT Execute/Cancel, and Auto/Manual parameters are available
as follows. By turning the respective bit ON or OFF, the operation command
for the channels of the corresponding communications unit number is exe-
cuted.
For TC4
RUN/STOP, AT Execute/Cancel, and Auto/Manual parameters are available
as follows. By turning the respective bit ON or OFF, the operation command
for the channels of the corresponding communications unit number is exe-
cuted.
For TC2
No.7
No.6
No.5
No.4
No.3
No.2
No.1
No.0
CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1
For TC4
No.3
No.2
No.1
No.0
CH4 CH3 CH2 CH1 CH4 CH3 CH2 CH1 CH4 CH3 CH2 CH1 CH4 CH3 CH2 CH1
Bits
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
No.00 to 07
No.7
No.6
No.5
No.4
No.3
No.2
No.1
No.0
CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1
No.08 to 15
No.15
No.14
No.13
No.12
No.11
No.10
No.9
No.8
CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1
No.16 to 23
No.23
No.22
No.21
No.20
No.19
No.18
No.17
No.16
CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1
No.24 to 31
No.31
No.30
No.29
No.28
No.27
No.26
No.25
No.24
CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1
Bits
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
No.00 to 03
No.3
No.2
No.1
No.0
CH4
CH3
CH2
CH1
CH4
CH3
CH2
CH1
CH4
CH3
CH2
CH1
CH4
CH3
CH2
CH1
No.04 to 07
No.7
No.6
No.5
No.4
CH4
CH3
CH2
CH1
CH4
CH3
CH2
CH1
CH4
CH3
CH2
CH1
CH4
CH3
CH2
CH1
No.08 to 11
No.11
No.10
No.9
No.8
CH4
CH3
CH2
CH1
CH4
CH3
CH2
CH1
CH4
CH3
CH2
CH1
CH4
CH3
CH2
CH1
Summary of Contents for EJ1 EtherCAT
