![background image](http://html1.mh-extra.com/html/omron/ej1-ethercat/ej1-ethercat_user-manual_742375069.webp)
44
Control Linked to a Host Device
Section 3-3
Note
• The Programmable Terminal and E58-CIFQ1 Connecting Cable cannot
be connected at the same time.
• When connecting the cable for the Support Software to an EJ1C-EDU
End Unit, either turn OFF the Programmable Terminal's power supply or
switch the Programmable Terminal's screen to the system menu.
PLC
The following example settings are for communications with port 2 of a CJ1W-
SCU41 Serial Communications Unit.
3-3-4
Adjustment
Execute autotuning (AT) to make the PID adjustments.
If ST is activated, the PID will be automatically calculated when using stan-
dard control.
Refer to
4-3-8 Tuning
for details.
Port 2: User/custom settings
Custom settings
Port 2: Serial communications mode
NT Link (1: N)
Port 2: Baud rate
High-speed
Port 2: NT Link (1: N) maximum unit number
0
V1.2
Summary of Contents for EJ1 EtherCAT
