199
Detailed Description of Services
Section 7-5
Note
(1) Set values that can be changed during operation are saved to EEPROM.
• Descriptions of and Precautions for Operation Commands
Refer to
Description of Operation Commands and Precautions
on
page 185
(2) Performing set value initialization will initialize the port B communications
protocol to 0: CompoWay/F. If you do not want to change the protocol,
turn ON No. 3 of SW2. The protocol will be set to Modbus regardless of
the port B communications protocol setting.
(3) All set values are saved in non-volatile memory (EEPROM).
RUN
0A
00: Channel 1
01: Channel 2
02: Channel 3
03: Channel 4
FF: All channels
STOP
0B
Manual
0C
Auto
0D
40% AT Execute
0E
100% AT Execute
0F
AT Cancel
10
Bank 0 Change
1E
Bank 1 Change
1F
Bank 2 Change
20
Bank 3 Change
21
Local SP Change
22
Remote SP Change
23
Reset Error
2D
Always 00.
Alarm 1 Latch Cancel
32
00: Channel 1
01: Channel 2
02: Channel 3
03: Channel 4
FF: All channels
Alarm 2 Latch Cancel
33
Alarm 3 Latch Cancel
34
All Alarm Latch Cancel
35
Save RAM Data (See note 1.) 37
Always FF.
Set value initialization (See
note 2.)
38
Always 00
Save RAM Data 2 (See note
3.)
39
Always FF
Register Unit Configuration
3B
00: Reset
01: Register
Operation command
Command code
TC related information
V1.2
V1.2
Summary of Contents for EJ1 EtherCAT
