![background image](http://html1.mh-extra.com/html/omron/ej1-ethercat/ej1-ethercat_user-manual_742375096.webp)
71
Setting Control Specifications
Section 4-3
Note
When using a relay for cooling output, the minimum output ON/OFF width can
be used to prevent relay degradation. For details on this setting, refer to
page 58.
4-3-4
Setting the Set Point
These parameters set the set point.
Note
The decimal point position is determined by the sensor selection.
Refer to
4-7-1 Bank Function
for details on banks.
Set the set point so that it is within the input range as well as the set point lim-
iter range.
If the set point is out-of-range, the internal set point actually used for control
will be limited to a value within the input range and set point limiter range.
■
Set Point Limiter
These parameters apply a limit to the set point's setting range so that the con-
trol subject does not reach an abnormal temperature.
Note
The decimal point position is determined by the sensor selection.
Set the SP Upper and Lower Limits within the input range and also set the SP
Upper Limit > SP Lower Limit.
If the SP Lower Limit > SP Upper Limit, the larger value will function as the SP
Upper Limit. In addition, if the limit range is set outside of the input range, it
will be limited to the input range.
The SP will not be changed automatically, even if the input type or SP Limiter
is changed. Although the SP will not be changed automatically, the internal
SP used for control will be limited to the input range or SP Limiter (whichever
range is narrower).
MV % (cooling)
Cooling capacity %
0
100
100
Water
cooling
Air
cooling
Linear
Variable type
Parameter name
Setting range
Default
D0/90
Set point
(BANK)
−
1999 to 9999 EU
0
Variable type
Parameter name
Setting range
Default
D5/95
SP Upper Limit
(Channel)
−
1999 to 9999 EU
9999
SP Lower Limit
(Channel)
−
1999 to 9999 EU
−
1999
Conditions for use
No special conditions
Summary of Contents for EJ1 EtherCAT
