![background image](http://html1.mh-extra.com/html/omron/ecobra-600/ecobra-600_user-manual_743959156.webp)
156
eCobra 600 and 800 Robots with EtherCAT
24402-000 Rev B
9.3 Cable Seal Assembly
This section describes the cable seal assembly that is provided with the IP65 option, and
provides instructions for properly installing the seal.
Cable Seal Identification
You must mount the cable seal assembly (part number 04813-000) on the back of the robot dur-
ing the robot installation process. The cable seal assembly ships separately from the robot. Use
the figure below to identify the cable seal assembly parts. Figure 9-4.
Figure 9-4. Cable Seal Parts Assembly
Item
Description
A
Cable Seal Housing
Part number 04814-000
B
Cable Seal Flange (upper)
Part number 04816-000
C
Splash Guard
Part number 04817-000
D
Cable Seal Flange (lower)
Part number 04815-000
NOTE:
Shown with Cable Seal (P/N 04818-000) in place.
Installation Procedure
Use the following procedure to install the cable seal assembly.