![background image](http://html1.mh-extra.com/html/omron/ecobra-600/ecobra-600_user-manual_743959129.webp)
Chapter 7: Maintenance
Figure 7-18. Bulb Properly Seated
8. Make sure to reconnect the wires from the LED if you disconnected them earlier.
9. Push the front cover into the body, taking care to align all of the plug-type connectors.
Verify that the LED light wires do not get crimped as you reinstall the cover.
!
CAUTION:
PROPERTY DAMAGE RISK.
Make sure the connector lugs are properly aligned with the receptacle
before attempting to seat the connector.
1. Re-install the two screws on the back of the body.
2. Re-install the Front Panel in its mounting.
3. Reconnect the cable between the Front Panel and the iCS-ECAT.
24402-000 Rev B
eCobra 600 and 800 Robots with EtherCAT
129