Oki C810 Maintenance Manual Download Page 41

Page: 41 / 253

44015503TH Rev. 1

40 /

Oki Data CONFIDENTIAL

3. INSTALLATION

Set button

Quick Guide

Bag for Quick Guide

vents

Loading paper in the multi-purpose tray

(1) Open the multi-purpose tray and also the paper supporter.

(2) Move the manual feed guide to the paper size.

(3) Align the edges of the paper.

(4) Insert the paper, print-face up, along the manual feed guide straight as far as it will

go.

Multi-purpose tray

Paper support extension

Manual feed guide

(5) Press the set button.

storing Quick Guide

Stick a bag for Quick Guide on the printer to store Quick Guide.

(1) Remove double-faced tapes (two places) from the back of the bag.

(2) Stick the bag for Quick Guide on the printer.

Note! Stick the bag to a place not to block the vents on the printer.

Double-faced tape

Summary of Contents for C810






























































































































































































































































Search results

Summary of Contents for C810

Reviews:

Oki C810, Maintenance Manual, Page: 41 / 253

Search results

Summary of Contents for C810

Reviews: