Oki C810 Maintenance Manual Download Page 229

Page: 229 / 253

44015503TH Rev. 1

228 /

Oki Data CONFIDENTIAL

7. TROUBLESHOOTING PROCEDURE

2. Press the "General" tab of the displayed Certificate information, and press "Install

Certificate" button.

3. The "Certificate Import Wizard" is displayed. Install Certificate in accordance with

the displayed procedure. Select "Automatically select the certificate store based on

the types of certificate". Then, the Certificate will be installed automatically.

7.5.4.5.7 the error message "name of security certificate is invalid or does

not match the site name" is displayed.

It means that the IP address of printer is different from the IP address that is described on

certificate, or from the IP address when the certificate is created.

Solution : Return the IP address of printer back to the address when self-sign certificate

is created, or to the address when CSR is created.

Summary of Contents for C810






























































































































































































































































Search results

Summary of Contents for C810

Reviews:

Oki C810, Maintenance Manual, Page: 229 / 253

Search results

Summary of Contents for C810

Reviews: