Oki C810 Maintenance Manual Download Page 220

Page: 220 / 253

44015503TH Rev. 1

219 /

Oki Data CONFIDENTIAL

7. TROUBLESHOOTING PROCEDURE

7.5.4.1.1 Is the certificate created?

Log-on in as the administrator, and select "Security" "Encryption (SSL/TLS)".

If the following screen is displayed, certificate of the printer is not created yet. (The same

screen is displayed when failed to create certificate.)

Solution: Create certificate by referring to the User’s Manual (Advanced edition).

7.5.4.1.2 Is the ssL/tLs setting set to [on]?

Log-on in as the administrator, and select "Security" "Encryption (SSL/TLS)".

If the following screen is displayed, certificate has already been created, but the SSL/TLS

setting is turned [OFF].

Before creating certificate (default state)

Solution : Set the SSL/TLS setting to [ON].

Summary of Contents for C810






























































































































































































































































Search results

Summary of Contents for C810

Reviews:

Oki C810, Maintenance Manual, Page: 220 / 253

Search results

Summary of Contents for C810

Reviews: