NXP Semiconductors K22F series, Reference Manual, Page: 775 / 1407

Unused bits in R n are cleared in unsigned right-aligned modes and carry the sign bit
(MSB) in sign-extended 2's complement modes. For example, when configured for 10-bit
single-ended mode, D[15:10] are cleared. When configured for 11-bit differential mode,
D[15:10] carry the sign bit, that is, bit 10 extended through bit 15.
The following table describes the behavior of the data result registers in the different
modes of operation.
Table 34-2. Data result register description
Conversion
mode
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 Format
16-bit differential S D D D D D D D D D D D D D D D Signed 2's
complement
16-bit single-
ended D D D D D D D D D D D D D D D D Unsigned right
justified
13-bit differential S S S S D D D D D D D D D D D D Sign-extended
2's complement
12-bit single-
ended 0 0 0 0 D D D D D D D D D D D D Unsigned right-
justified
11-bit differential S S S S S S D D D D D D D D D D Sign-extended
2's complement
10-bit single-
ended 0 0 0 0 0 0 D D D D D D D D D D Unsigned right-
justified
9-bit differential S S S S S S S S D D D D D D D D Sign-extended
2's complement
8-bit single-
ended 0 0 0 0 0 0 0 0 D D D D D D D D Unsigned right-
justified
NOTE
S: Sign bit or sign bit extension;
D: Data, which is 2's complement data if indicated
Address: Base a 10h (4d × i), where i=0d to 1d
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
0 D
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ADCx_Rn field descriptions
Field Description
31–16
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
D Data result
Chapter 34 Analog-to-Digital Converter (ADC)
K22F Sub-Family Reference Manual, Rev. 4, 08/2016
NXP Semiconductors 775