NXP Semiconductors K22F series, Reference Manual, Page: 605 / 1407

28.4.3 Flash Bank 1 Control Register (FMC_PFB1CR)
This register has a format similar to that for PFB0CR, except it controls the operation of
flash bank 1, and the "global" cache control fields are empty.
Address: 4001_F000h base + 8h offset = 4001_F008h
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
R
B1RWSC[3:0] 0 B1MW[1:0] 0
W
Reset 0 0 1 1 0 0 0 0 0 0 0 0 0 0 1 0
Bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
0 0
B1DCE
B1ICE
B1DPE
B1IPE
B1SEBE
W
Reset 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1
FMC_PFB1CR field descriptions
Field Description
31–28
B1RWSC[3:0]
Bank 1 Read Wait State Control
This read-only field defines the number of wait states required to access the bank 1 flash memory.
The relationship between the read access time of the flash array (expressed in system clock cycles) and
RWSC is defined as:
Access time of flash array [system clocks] = RWSC + 1
The FMC automatically calculates this value based on the ratio of the system clock speed to the flash
clock speed. For example, when this ratio is 4:1, the field's value is 3h.
27–19
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
18–17
B1MW[1:0]
Bank 1 Memory Width
This read-only field defines the width of the bank 1 memory.
Table continues on the next page...
Chapter 28 Flash Memory Controller (FMC)
K22F Sub-Family Reference Manual, Rev. 4, 08/2016
NXP Semiconductors 605