NXP Semiconductors K22F series, Reference Manual, Page: 535 / 1407

24.7.11 Watchdog Reset Count register (WDOG_RSTCNT)
Address: 4005_2000h base + 14h offset = 4005_2014h
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Read
RSTCNT
Write
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
WDOG_RSTCNT field descriptions
Field Description
RSTCNT Counts the number of times the watchdog resets the system. This register is reset only on a POR. Writing
1 to the bit to be cleared enables you to clear the contents of this register.
24.7.12 Watchdog Prescaler register (WDOG_PRESC)
Address: 4005_2000h base + 16h offset = 4005_2016h
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Read 0
PRESCVAL
0
Write
Reset 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0
WDOG_PRESC field descriptions
Field Description
15–11
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
10–8
PRESCVAL
3-bit prescaler for the watchdog clock source. A value of zero indicates no division of the input WDOG
clock. The watchdog clock is divided by (PR 1) to provide the prescaled WDOG_CLK.
Reserved This field is reserved.
This read-only field is reserved and always has the value 0.
24.8 Watchdog operation with 8-bit access
24.8.1 General guideline
When performing 8-bit accesses to the watchdog's 16-bit registers where the intention is
to access both the bytes of a register, place the two 8-bit accesses one after the other in
your code.
Chapter 24 Watchdog Timer (WDOG)
K22F Sub-Family Reference Manual, Rev. 4, 08/2016
NXP Semiconductors 535