NXP Semiconductors K22F series, Reference Manual, Page: 1245 / 1407

UARTx_SFIFO field descriptions (continued)
Field Description
0 Transmit buffer is not empty.
1 Transmit buffer is empty.
6
RXEMPT
Receive Buffer/FIFO Empty
Asserts when there is no data in the receive FIFO/Buffer. This field does not take into account data that is
in the receive shift register.
0 Receive buffer is not empty.
1 Receive buffer is empty.
5–3
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
2
RXOF
Receiver Buffer Overflow Flag
Indicates that more data has been written to the receive buffer than it can hold. This field will assert
regardless of the value of CFIFO[RXOFE]. However, an interrupt will be issued to the host only if
CFIFO[RXOFE] is set. This flag is cleared by writing a 1.
0 No receive buffer overflow has occurred since the last time the flag was cleared.
1 At least one receive buffer overflow has occurred since the last time the flag was cleared.
1
TXOF
Transmitter Buffer Overflow Flag
Indicates that more data has been written to the transmit buffer than it can hold. This field will assert
regardless of the value of CFIFO[TXOFE]. However, an interrupt will be issued to the host only if
CFIFO[TXOFE] is set. This flag is cleared by writing a 1.
0 No transmit buffer overflow has occurred since the last time the flag was cleared.
1 At least one transmit buffer overflow has occurred since the last time the flag was cleared.
0
RXUF
Receiver Buffer Underflow Flag
Indicates that more data has been read from the receive buffer than was present. This field will assert
regardless of the value of CFIFO[RXUFE]. However, an interrupt will be issued to the host only if
CFIFO[RXUFE] is set. This flag is cleared by writing a 1.
0 No receive buffer underflow has occurred since the last time the flag was cleared.
1 At least one receive buffer underflow has occurred since the last time the flag was cleared.
47.3.19 UART FIFO Transmit Watermark (UARTx_TWFIFO)
This register provides the ability to set a programmable threshold for notification of
needing additional transmit data. This register may be read at any time but must be
written only when C2[TE] is not set. Changing the value of the watermark will not clear
the S1[TDRE] flag.
Address: Base a 13h offset
Bit 7 6 5 4 3 2 1 0
Read
TXWATER
Write
Reset 0 0 0 0 0 0 0 0
Chapter 47 Universal Asynchronous Receiver/Transmitter (UART)
K22F Sub-Family Reference Manual, Rev. 4, 08/2016
NXP Semiconductors 1245