NEC V850E/PH2, User Manual

Page: 482 / 1053

482
Chapter 11 16-bit Timer/Event Counter T
User’s Manual U16580EE3V1UD00
(5) Overflow operation
Counter overflow occurs in the free-running mode, pulse width measurement mode, encoder
compare mode and offset trigger generation mode.
Overflow occurs when the counter value changes from FFFFH to 0000H.
In the free-running mode, pulse width measurement mode, offset trigger generation mode, the
overflow flag (TTnOVF) is set to 1 and an overflow interrupt (INTTTnOV) is output. At this time, the
TTnEOF flag is not set.
In the encoder compare mode, the encoder dedicated overflow flag (TTnEOF) is set to 1 and an
overflow interrupt (INTTTnOV) occurs. At this time, the TTnOVF flag is not set.
Under the following conditions, overflow does not occur.
• When the counter value changes from initial setting FFFFH to 0000H immediately after
counting start
• When FFFFH is set to the compare register, and the counter is cleared to 0000H upon a match
between the counter value and the compare setting value.
• When, in the pulse width measurement mode and offset trigger generation mode, capture
operation is performed for counter value FFFFH, and the counter is cleared to 0000H.
(6) Underflow operation
Counter underflow occurs in the triangular wave PWM Mode and encoder compare mode.
Underflow occurs when the counter value changes from 0000H to FFFFH.
When underflow occurs in the triangular wave PWM mode, an overflow interrupt (INTTTnOV)
occurs. At this time, the TTnOVF flag is not set.
In the encoder compare mode, the encoder dedicated underflow flag (TTnEUF) is set to 1, and an
overflow interrupt (INTTTnOV) occurs.
Underflow does not occur during count down immediately following counter start.
(7) Description of interrupt signal operation
In TMT, the following interrupt signals are output.
Note: In the encoder compare mode, when TTnSCE = 0, an encoder clear interrupt (INTTTnEC) is
output.
Remark: n = 0, 1
Name Occurrence Cause
INTTTnCC0 • Match between counter and setting value of TTnCCR0 register
• Capture to TTnCCR0 register due to TITn0 pin input
INTTTnCC1 • Match between counter and setting value of TTnCCR1 register
• Capture to TTnCCR1 register due to TITn1 pin input
INTTTnOV Overflow and underflow occurrence
INTTTnEC
Note Counter clearing through TECRTn pin