NEC POWERMATE ES 5200 - SERVICE, Service Manual

Page: 94 / 306

Disassembly and Reassembly 3-11
2.
Fit the flanges on the bottom and side of the cover into the rails along the
bottom and side edges of the chassis.
3.
Fit the tabs on the top of the cover into the slots at the top of the chassis (see
the following figure).
For the right side cover, also align the tab on the inside of the cover with its
slot on the back of the chassis.
Note:
For the right side cover only, in addition to fitting
the cover’s flanges and tabs in the chassis, also align the tab
on the inside of the cover with its slot on the back of the
chassis.
Positioning the Minitower Left Side Cover
A – Cover Tabs (under cover) C – Side Cover Flanges
B – Tab Slots D – Securing Rails
4.
Press the top and bottom of the side cover against the chassis and slide the
cover toward the front of the chassis until it locks in place.
Note:
If the cover does not slide all the way to the front
of the chassis, check that the side cover tabs are properly
inserted into their slots in the top cover. For the right side
cover only, check that the tab on the inside of the cover is
inserted into its cutout on the chassis.
5. Push down on the slide lock to lock the side cover in place.