3-76 Disassembly and Reassembly
Power Supply Removal
The following sections describe how to remove the power supply from small
desktop, desktop, and minitower systems.
!
WARNING
Before removing the system unit cover, turn off the power
and unplug the system power cable. Power is removed only
when the power cable is unplugged.
Removing the Power Supply — Small Desktop
Remove the power supply from a small desktop system using these steps.
!
WARNING
Before removing the system unit cover, turn off the power
and unplug the system power cable. Power is removed only
when the power cable is unplugged.
1.
Turn off the system and disconnect the system power cord.
2.
Ensure that all external cables are disconnected from the front and rear of
the system.
3.
Remove the system unit cover (see “Removing the Small Desktop or
Desktop Cover”).
4.
Label and disconnect every power cable connected to a device or board
within the system.
5.
Remove the three screws holding the power supply to the chassis (see the
following figure).
Locating the Power Supply Screws — Small Desktop
A – Small Desktop Power Supply Screws
6.
Gently pull the power supply out of the chassis.
Summary of Contents for POWERMATE ES 5200 - SERVICE
