3-40 Disassembly and Reassembly
Use the following procedure to use the latch correctly.
1.
Make sure the chassis latch is in the open position.
2.
Position the narrow ends of the system board rails in the chassis guides.
3.
Slide the system board partway into the system unit along the chassis rail
guides. Stop sliding the board when the outside edge of the system board
aligns with the outside edge of the chassis (see the following figures).
Correct Alignment of the System Board — Small Desktop
A – Rail
C – Edge of Chassis
B – Latch Open
D – Edge of System Board
Incorrect Alignment of the System Board — Small Desktop
A – Latch in Incorrect Position
C – Edge of Chassis
B – System Board Rail
D – Edge of System Board
Summary of Contents for POWERMATE ES 5200 - SERVICE
