NEC POWERMATE ES 5200 - SERVICE, Service Manual

Page: 60 / 306

System Configuration 2-23
Monitoring Capabilities
An NEC MagicEye™ Technology chip on the system board supports many new
and advanced real-time monitoring capabilities used by DMI. The chip provides
the following:
„
an integrated temperature sensor with configurable interrupt generation
based on upper and lower temperature limits
„
a power supply monitor with configurable interrupt generation based on
upper and lower voltage limits
„
chassis intrusion detection with interrupt generation capabilities (see
“Using the Chassis Intrusion Notification Feature”).
To take advantage of these features, DMI has expanded its interface in the
following areas.
„
Interrupts may be enabled or disabled.
„
High and low limits can be set and are displayed for temperature and
power supply voltages.
„
Current readings are displayed for temperature, power supply voltages,
and chassis state.
„
Interrupts can be detected when “out of range” conditions occur. User
prompts are displayed to alert the user to a potentially harmful condition.
Using the Chassis Intrusion Notification Feature
LANDesk Client Manager allows the user to monitor the system against chassis
intrusion. Whenever the chassis is opened, LANDesk Client Manager logs the
intrusion and reports the incident in a screen message the next time the system is
booted. The message appears in a LANDesk Client Manager Notification
window. The window appears every time the system is rebooted until the report
is cleared.
Close the notification window to remove the message from the screen. Clear the
message to prevent it from appearing again the next time the system is rebooted.
To clear the message, follow these steps.
1. Access LANDesk Client Manager.
„
If the LANDesk Client Manager Notification window is still open, click
Yes
, and then click the
Client Manager
button.
„
From the Windows desktop, click
Start
on the taskbar, point to
Programs, point to
LANDesk Client Manager
, and click
LANDesk
Client Manager
.
„
LANDesk Client Manager opens.